DVA Controls
Specialised Electrical and Electronic Equipment
FLIGHT SERVO ANALYSERS
|
|
DVA Controls Specialised Electrical and Electronic Equipment FLIGHT SERVO ANALYSERS
|
|
Home > R/C Products > Flight Servo Analysers
The DVA Controls USB Transmitter Analyser & Servo Tester provide the means to check the pulse widths from your transmitted signal and to display the current being drawn and the supply voltage to the servo, allowing one to accurately determine any problems with your R/C installation. An 'oscilloscope' display of the control pulse shows any problems with too many servos overloading a receiver output.
Also...
The T1501 allows you to control your servo(s) directly from the unit, allowing accurate control surface movements to be established.
The T1501 can operate either as a stand alone unit or, for extra functionality, via a USB port from your computer.
The T1501 is powered from the USB port of your computer or from an internal battery. Servo power being taken either from the receiver battery itself or another suitable battery. This allows the flight battery voltage to be included in the testing and for either 4 cell (4.8 volts) or 5 cell (6 volt) systems to be used.
A low battery alert warns when the internal battery needs replacing.
PURCHASING INFO General Information for Purchasing all DVA products
T1501 USB Transmitter Analyser & Servo Tester
|
|
|
Servo
current 0 – 3 Amps |
Return To R/C Products Homepage
